UT_RESET_TEXT — How a trip will clear, as text (function)

The end of a fault line: how the protection clears and, while it is counting, how
long that takes. The device blocks don't use it: their status says how a trip clears
by its prefix (Fault:, Retrying:, Latched:, Locked:, see
UT_STATUS_TEXT) and keeps the time in timeLeft. Use it for a
simple display, or a fault line of your own.

Pins

OverloadLine := CONCAT('Fault: overload', UT_RESET_TEXT(Motor1.overload.reset,
    Motor1.overload.retries, Motor1.overload.maxRetries, Motor1.overload.timeLeft));
(* 'Fault: overload, auto reset in 25 s' (OverloadLine : STRING(64)) *)

How it works

The time (UT_TIME_TEXT) is added only while TimeLeft is above
0, that is while the recover or retry wait runs. While the cause is still there
nothing counts, and the text stops at , auto reset or , retrying 2 of 3.